Sunday, July 20, 2014

Brooklyn's Nursery Project #2: Decorative Letter B in Frame

The second project I tackled for Brooklyn's nursery is a decorative letter. I saw a really cute idea on Pinterest where someone put a letter inside a frame.  I loved it, so I decided to make my own version. I'm pretty happy with how it turned out, though this project was more work than the first.

Here's a sneak peak at how it turned out...follow the instructions below to see how I put it all together!

I went shopping at Michaels and Hobby Lobby.  I knew sort of what I was going for, but I wasn't sure exactly how I wanted it to look. So I bought a bunch of scrapbook paper and wrapping paper that I thought fit with the theme and colors I wanted (black and white for the B and then some pink accents - again, this will be hung on the pink part of the wall).  Then in the dollar bins I found some pink ribbon that I thought might work, and some 3D flowers that had sticky pads on the back to attach.  I also bought some pearl looking things that are sticky.  I bought it all and figured I will return everything I don't use. Now that I have the shopping out of the way, I'll show you how I ended up creating it and what I ended up using.

Total Cost:
Approximately $30 using coupons for Michaels and Hobby Lobby

Supplies:
1 decorative letter (8 inch size)
1 Decorate frame without glass or a back
Scrapbook paper
Black paint
Sponge paint brush
Small paper cutter or scissors
Exacto knife
Mod Podge
Ribbon
Floral accents
Hot glue
Picture hanger
Hammer
Small level

Instructions:
1) First I found the cardboard letter B at Hobby Lobby for $1.99.  It was the best price and I needed the 8 inch size to fit inside the frame that I bought.  (I'll show you what it looks like in the frame at the very end).


2) Next, I painted all the edges with black paint. I knew I was going to use a black and white patterned paper, so I wanted to make sure all the edges that weren't going to be covered with paper were covered with paint - and it would have been a waste of paint to paint the entire letter black knowing I was putting paper on it.  I just used acrylic paint black paint that I had on hand. It didn't take much to cover all the edges - don't forget the edges inside the cut outs either!


3) Once the paint was dry, I selected which paper I wanted to use as the main background for the letter. Since we are trying to stick with the fairytale type theme, we like use the fleur-de-lis type patterns. I found one inside the pad of scrapbook paper I bought. I used my mod podge ($3.99 at JoAnn) as glue.  Using a sponge brush, I sponged on Mod Podge across the whole letter.  Then I carefully placed the paper on the letter, ensuring that it covered the whole thing.  NOTE: You need to do this quickly but carefully. The Mod Podge will dry relatively quickly and then you will not be able to adjust the paper location after that. I just barely missed the very bottom of the B (you can't tell since I painted the edges black - thank goodness!).


4) I let the Mod Podge dry over night and the next day I used an Exacto knife to cut off the excess paper. I place the B upside down on a cutting board (be careful not to use one that has a lot of knife cuts in it already because it will mess up your knife and you'll end up not cutting straight). I cut along the outside edge and then the inside cut outs of the B.



5) I then decided that I wanted another style of paper to give it some interest. In the same pad of scrapbook paper, there was a black piece with some different accents on it that gave some texture. I measured out how much I wanted it to cover and then using my paper cutter, I cut the paper in a straight line.


6) Once cut, I also used Mod Podge to glue this piece along the left side of the B, ensuring it lined up on the edge.  Once it was dry, I used the Exacto knife again to clean up the top and bottom edge.


7) Next, I wanted to add some pink to it.  The ribbon I bought ended up being perfect (and it was in the $1 bin at Michaels!). It was solid down the middle, but sheer on each side. I liked that you can see through to the paper on the edges, but the solid middle actually covers up the seam between the two types of paper. I used scissors to cut the correct size ribbon. Using Mod Podge, I glued it on.  The ribbon did end up bubbling a little, but over all, it just gives it more texture rather than looking bad. I used scissors to clean up the edge to get the ribbon as close to the end as possible.


8) Once all those pieces were dry, I decided the only thing left that I wanted to use were the flowers. So it was time to seal the paper. Using my foam paintbrush again, I put on a thin coat of Mod Podge across the entire project (I admit I was a little scared because I've never done this before! But I promise it does dry clear!!).  I let each coat sit over night, and I ended up doing about 3 coats. I also made sure to seal the edges of the letter also - this helps keep any pieces of the paper that were 100% glued down the first time from peeling up later.


9) Next, I used a level and hammer to attach a picture hanger ($1.99 at Hobby Lobby for a 5 pack) to the back of the letter. I wanted to do this while it was still flat so I didn't smash the flowers once they were attached. I used a level to ensure the hanger was put on level so it doesn't hang at an angle on the wall.  NOTE: Make sure your nails for the hanger are not thicker than your letter. My nails were a little bit too long and started poking through the front side! We were able to bang it back in, and I used a sharpie to cover the part of the paper that was affected - now you can't tell unless you know where it was.


10) The final step was to hot glue the flowers (I used a pink and a white pack that I found for $1.50 each in the dollar bins at Michaels) on to the corner of the letter. Even though the flowers had sticky pads on the back, I didn't trust that they would stay on. So I used a hot glue gun to glue them on.  Once the flowers were on, it was a finished project!


And here is a picture of it in the frame (I used a 40% off coupon at Hobby Lobby so the frame only cost me $17.99!), so you have an idea of what it will look like on the wall!  I can't wait to hang it up!

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...